Xilence presents the Interceptor case's "little" brother: the Black Hornet. It has room for ATX motherboards and for dual radiator water cooling, which can be built into the upper section of the case. Just as in the Interceptor, the little brother offers Hot Swap SSD/HDD plug-in modules that can be used to quickly and easily swap hard drives. Numerous cable and hose routes and lots of space between the motherboard bracket and side panel help you build a tidy system. The possible case vents draw all of the fresh air through an air filter - this allows you to have continued fun with your clean, efficient system. Four DVD slots are located in the front along with two Hot Swap inserts. The drives are noiselessly cooled by a 140 mm fan built into the door in front of the drive inserts. In the upper section you will find USB 3.0 connections, audio inputs and outputs along with power and reset buttons.
As any hardware enthusiast knows, it is common to make regular changes to hardware solutions. Switching hard drives is particularly difficult and also not exactly without risk. Data is often lost, as the sensitive SATA sockets break off or the drive itself is shaken too much during insertion or removal. The Black Hornet solves this problem with two Hot Swap inserts. The drives are fixed into installation frames and can be slotted in from externally with ease. The data connections and energy supply are established automatically. This means it is no longer necessary to open the case.
In order to keep the system working both quietly and for longer, all of the sucking fans only draw filter air into the inner part of the case. These filters can be removed and cleaned without any great effort.
• In the front
• Under the power supply
Cramped conditions quickly erode your desire to set up your system. To keep this from happening, Black Hornet has room for ATX motherboards, plenty of cable routes and enough space between the motherboard bracket and the side panel.
|Material & Size:|| |
Case material/thickness: SECC 0.6 & 0.8mm
4x 13,34cm (5.25”) exposed
2x 6,35cm (2.5”) HDD
2x 6,35cm (2.5“) or 8,89cm (3.5“) hot swap tray
4x 8,89cm (3.5”) HDD (hidden)
1x 6,35cm (2.5”) or 1x 8,89cm (3.5“) HDD docking station
Front: 1x 140mm
Side: 2x 120mm or 1x 200mm (optional)
Top: 2x 120mm or 2x 140mm (optional)
2x USB 3.0